最新バージョン
1.72 インストールしても安全
1.72 インストールしても安全
| タイトル： | eMaxMobileApp 1.72 |
| オペレーティング システム: |
|
| ライセンス： | 商用 |
| 追加日： | 2024/06/19 |
| 発行元： | Markus Schlegel |
| 評価： | クライアントをダウンロードして評価しよう！ |
| 更新ログ |
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com. TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano! Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via [email protected]. This version 1.72 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit. Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too. The new generation drive units DU-EP801 and DU-E600 as well as its variants RS and CRG are partially supported now All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version. Special to DU-E80X0 drive units: With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm. (with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%) (with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W) new in version 1.72 (26.03.24): - partial compatibility for EP801/EP motor firmware 4.2.1 new in version 1.71 (09.02.24): - partial compatibility for EP801/EP motor firmware 4.2.0 - minor optimizations new in version 1.70 (23.10.23): - minor bug fix new in version 1.69 (09.10.23): - minor improvements, change of EP801/EP6 message dialog texts new in version 1.68 (29.09.23): - adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10 new in version 1.67 (11.09.23): - bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11 new in version 1.66 (07.09.23): - adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1 - adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1 - adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11 - adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5 - adaption to DUE7000 FW 4.7.7 - adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7 new in version 1.65 (02.09.23): - EP801/EP6 change of max. peak power and max. torque range added - EP801/EP6 "reduced max. speed setting" enabled and enhanced - EP801/EP6 "motor angle setting" enabled - SC-EN500 display added - new cassette types added (just for reading) - correction in EP8xx performance view site with jump to next edit field - bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button new in version 1.63 (31.03.23): - update to newest firmware version 4.4.9 for DUE50X0 - update to newest firmware version 4.7.6 for DUE61X0 & DUE7000 - update to newest firmware version 4.1.10 for DUEP800 (EP8, EP8-CRG. EP8-RS) new in version 1.62 (21.03.23): - minor optimizations and bug fixes new in version 1.61 (02.03.23): - minor optimizations and bug fixes new in version 1.59 (26.02.23): - new battery types, Shimano STePS components and destination settings added new in version 1.58 (28.10.22): - corrections for display speed adjustment (special settings) new in version 1.57 (18.10.22): - update to newest firmware version 4.4.8 for DUE50X0 - update to newest firmware version 4.7.5 for DUE61X0 & DUE7000 - update to newest firmware version 4.9.4 for DUE80X0 - update to newest firmware version 4.1.9 for DUEP800 (EP8, EP8-CRG. EP8-RS) new in version 1.56 (17.10.22): - new battery types added - change of EP8 profile OEM default settings added new in version 1.55 (01.10.22): - display speed adjustment - torque range min. value added - improvements and indication for special EP8 types new in version 1.54 (10.07.22): - bugfix for changing cassette type on some drive units |
スクリーンショット（クリックで拡大表示）
関連
E-Bike Monitor for Shimano
The application establishes a Bluetooth connection with your e-bike to provide real-time data display on your device, including battery charge level, speed, support mode, and cadence.
Lupine Light Control
Lupine Light Control offers a comprehensive solution for managing your lighting system with ease and precision. Key features include: Direct control of light settings via the app Fine-tuning of light levels Customizable extras for …
Stages Flight Control
Stages Flight Control: The instructor tablet interface is exclusively available for Stages Flight Studio customers. This interface allows instructors to effectively manage their Stages Flight group display classes using their iOS …最新のレビュー
|
Audials Musictube
Audials Musictubeで音楽体験を効率化 |
|
SmartTools AutoBackup für Word
SmartTools AutoBackup for Word で作業を保護 |
|
SoftOrbits Photo Background Remover
SoftOrbits Photo Background Remover: 製品写真の編集に簡素化され効果的 |
|
BitDefender Antivirus Plus
BitDefender Antivirus Plus:サイバー脅威に対する高度な保護 |
|
SolidWorks SP04.1
SolidWorks SP04.1: エンジニアと設計者向けの包括的な CAD ソリューション |
|
MyRecover
MyRecoverで効率的なデータ復元! |
|
UpdateStar Premium Edition
ソフトウェアを最新の状態に保つことは、UpdateStar Premium Edition でかつてないほど簡単になりました。 |
|
Microsoft Edge
Webブラウジングの新しい標準 |
|
Google Chrome
高速で用途の広いWebブラウザ |
|
Microsoft Visual C++ 2015 Redistributable Package
Microsoft Visual C++ 2015再頒布可能パッケージでシステムパフォーマンスを向上させましょう! |
|
Microsoft Visual C++ 2010 Redistributable
Visual C++ アプリケーションの実行に不可欠なコンポーネント |
|
Microsoft OneDrive
Microsoft OneDriveでファイル管理を効率化 |
閲覧
最新のアップデート
PrivaZer Portable 4.0.109
PrivaZer is a privacy cleaner that scans your computer and provides you with a complete report of all computer and Internet traces that can be found on your PC.
PrivaZer 4.0.109
PrivaZerでプライバシーを保護しましょう!
GoodSync 12.9.3
GoodSync:信頼性の高いファイル同期ソフトウェアPale Moon 33.8.1.1
MoonchildのPale Moonによる高速ブラウジング体験
