| Tiêu đề: | eMaxMobileApp 1.72 |
| Hệ điều hành: |
|
| Giấy phép: | Commercial |
| Ngày đăng: | 19/06/2024 |
| Nhà phát hành: | Markus Schlegel |
| Đánh giá: | Tải về khách hàng để đánh giá! |
| Thay đổi đăng nhập: |
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com. TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano! Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via info@eMax-Tuning.com. This version 1.72 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit. Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too. The new generation drive units DU-EP801 and DU-E600 as well as its variants RS and CRG are partially supported now All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version. Special to DU-E80X0 drive units: With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm. (with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%) (with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W) new in version 1.72 (26.03.24): - partial compatibility for EP801/EP motor firmware 4.2.1 new in version 1.71 (09.02.24): - partial compatibility for EP801/EP motor firmware 4.2.0 - minor optimizations new in version 1.70 (23.10.23): - minor bug fix new in version 1.69 (09.10.23): - minor improvements, change of EP801/EP6 message dialog texts new in version 1.68 (29.09.23): - adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10 new in version 1.67 (11.09.23): - bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11 new in version 1.66 (07.09.23): - adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1 - adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1 - adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11 - adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5 - adaption to DUE7000 FW 4.7.7 - adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7 new in version 1.65 (02.09.23): - EP801/EP6 change of max. peak power and max. torque range added - EP801/EP6 "reduced max. speed setting" enabled and enhanced - EP801/EP6 "motor angle setting" enabled - SC-EN500 display added - new cassette types added (just for reading) - correction in EP8xx performance view site with jump to next edit field - bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button new in version 1.63 (31.03.23): - update to newest firmware version 4.4.9 for DUE50X0 - update to newest firmware version 4.7.6 for DUE61X0 & DUE7000 - update to newest firmware version 4.1.10 for DUEP800 (EP8, EP8-CRG. EP8-RS) new in version 1.62 (21.03.23): - minor optimizations and bug fixes new in version 1.61 (02.03.23): - minor optimizations and bug fixes new in version 1.59 (26.02.23): - new battery types, Shimano STePS components and destination settings added new in version 1.58 (28.10.22): - corrections for display speed adjustment (special settings) new in version 1.57 (18.10.22): - update to newest firmware version 4.4.8 for DUE50X0 - update to newest firmware version 4.7.5 for DUE61X0 & DUE7000 - update to newest firmware version 4.9.4 for DUE80X0 - update to newest firmware version 4.1.9 for DUEP800 (EP8, EP8-CRG. EP8-RS) new in version 1.56 (17.10.22): - new battery types added - change of EP8 profile OEM default settings added new in version 1.55 (01.10.22): - display speed adjustment - torque range min. value added - improvements and indication for special EP8 types new in version 1.54 (10.07.22): - bugfix for changing cassette type on some drive units |
Ảnh chụp màn hình (Nhấn vào đây để xem hình lớn hơn)
09/01/2025
|
TeamViewer QuickSupport 15.61.4 |
10/01/2025
|
CHEP - ESP PRD 1.0.0 |
10/01/2025
|
Bhagyadeep Odia Calendar 2023 1.0.4 |
10/01/2025
|
Topázio Cinemas 1.5.0 |
10/01/2025
|
Recipe Pal 2.1 |
An toàn và tải miễn phí được kiểm tra bởi UpdateStar
Mua ngay
App Store
App Store
Luôn cập nhật
với phần mềm UpdateStar miễn phí.
với phần mềm UpdateStar miễn phí.
Đánh giá mới nhất
|
User Experience Improvement Program Service
Nâng cao trải nghiệm người dùng của bạn với dịch vụ chương trình cải tiến của Acer |
|
 |
Microsoft SQL Server Compact x64 ENU
SQL Server Compact hiệu quả cho hệ thống x64 |
 |
App Explorer
Khám phá thế giới ứng dụng với App Explorer của SweetLabs. |
 |
HP System Event Utility
HP System Event Utility: Hợp lý hóa việc quản lý sự kiện hệ thống |
 |
utools
Tăng năng suất của bạn với uTools! |
 |
Canon G2000 series MP Drivers
Trình điều khiển máy in hiệu quả cho Canon G2000 Series |
UpdateStar Premium Edition
Microsoft Visual C++ 2015 Redistributable Package
Microsoft Edge
Microsoft Visual C++ 2010 Redistributable
Microsoft Update Health Tools
Microsoft OneDrive
